| DEPTH:
|
5
½” deep – One piece construction
|
| CONSTRUCTION:
|
1)
.078 solid extruded frame with coped corners
and screw boss assembly.
2) .062 tubular horizontal sash rails. Full
½” glazing leg.
3) .062 tubular aluminum louvers.
|
|
MATERIALS: |
6063-T5
aluminum alloy – 22,000 PSI tensile strength
|
|
GLAZING: |
Inside
wet glazed with extruded aluminum bead. Available
with 1/8, 3/16, ¼
and/or ½ inch insulated glass.
|
|
HARDWARE: |
1)
Stainless steel weather stripping at louvers.
2) Manual roto operator with heat-strengthen
gear assembly.
3) Take-out sash balances – easy removal
of sash
4) Cast white bronze sweep locks at meeting
rail
5) All stainless steal assembly and hardware
fasteners
|
|
SCREENS: |
Aluminum
frames with aluminum or fiberglass screening
|
|
FINISH: |
| Standard
or special color ESP |
Powder
coat |
| Color
anodized (A44) |
Kynar
500 |
| Clear
anodized (204-R1 or 215-R1)
|
Siliconized
polyester
|
|
|
SIZES: |
12”
to 48” in width, 26 ½” to 86 ½” in height.
See height chart for
standard height dimensions.
|
|
PERFORMANCE: |
Exceeds
AAMA 101 DH-HC65 rating for air infiltration, water
resistance and structural design loads.
Exceeds ASTM F842
for forced entry requirements.
|
|
OPTIONS: |
1
Piece mullion system
Flange or equal leg frame construction
Custom options for interior operable
sashes – contact factory for details.
|
