| |
|
 |
|
|
|
|
|
|
SERIES
200-HOPPER, 300-PROJECTED, 400-CASEMENT, 500
FIXED
|
|
|
| |
|
SERIES
200 Project-In
SERIES 300 Project-Out
|
| |
|
P-HC-65 |
| SYSTEM: |
| Depth |
2" |
| Construction |
Tubular
Vents with Mitered and Crimped Corners
Solid Frame with Coped and Butt type assembly
Full 3/4" Glazing Leg |
| Material |
6063-T5
22,000 psi Tensile |
| Glazing |
Inside
Glazed |
| Hardware |
Stainless
Steel ™ 4-Bar hinges
Cast White Bronze Cam Handles and Keepers |
| Screens |
Extruded
or Roll Formed Screens
Fiber Mesh, Aluminum Mesh or Stainless Steel Mesh |
| Finishes |
Standard
or Special Color ESP
Color Anodized (a44)
Clear Anodized (204-R1 or 215-R1)
Powder Coat
Kynar 500
Siliconized Polyester |
| |
|
HI-LITE
SPECIFICATIONS FOR SERIES 200 AND 300
|
| |
| PERFORMANCE: |
| Exceeds
AAMA Rating HC-65 for air infiltration, water
pressure and structural design. |
| |
| OPTIONS: |
Mullions:
Tubular, Self Mull
Receptor: 1 and 2-Piece, Sill Receptor
Custom options available, contact factory for
details. |
|
|
| GENERAL |
| Aluminum
Project-In windows of Series 200 or Project-Out
windows of Series 300 shall conform to the design
and construction of Series 200 and Series 300,
as manufactured by Superior Window Corporation.
Windows shall conform with all requirements of
AAMA P-HC-65 specifications. |
| |
| CONSTRUCTION |
| Frame
and ventilator members shall be of 6063-T5 aluminum
alloy. Frame members, muntins, glazing beads,
mullions and starter members shall be solid extruded
shapes. Ventilator and intermediate frame members
shall be tubular extruded shapes. |
| |
| ASSEMBLY |
| All
frame members shall have coped joints and shall
be fastened together with aluminum stainless steel
fasteners. All ventilators shall have mitered
joints, reinforced by a solid corner key and mechanically
crimped to prevent corner rotation. All joints
shall be weatherproofed with an acrylic seam sealer.
|
| |
| WEATHERSTRIPPING |
| All
ventilators shall be provided with two (2) rows
of extruded leaf type weatherstripping, set into
integrally extruded grooves or ventilator members.
Weatherstripping shall provide continuous perimeter
contact to assure weather tightness. |
| |
| GLAZING |
| Windows
shall be designed to receive from 3/16" to
1" insulated glass. Glazing leg rebates shall
not be less than .75 inches deep. Units shall
be glazed from the interior with an aluminum snap-in
bead. |
| |
| OPERATING
HARDWARE |
| All
ventilators shall be provided with manufacturer's
standard cam locking hardware to properly open,
close and lock vent. Locking hardware shall be
White Bronze with a satin finish or high-pressure
die cast zinc alloy with finish to match windows.
Ventilators exceeding 48" in width shall
be provided with two (2) locks. Each vent shall
be mounted on 4-bar hinges and shall be balanced
when in an open position with sides properly adjusted.
The 4-bar hinges shall be mounted with concealed
fasteners to the structural webs of the frame
and vent. Roto operators are optional for outswing
ventilators requiring manual clerestory or electrical
remote operation. |
| |
| SCREENS |
| Screens
shall be sliding wickets for cam lock operator.
Screens shall be extruded or roll formed box members
for roto operated and inswing ventilators. Screening
shall consist of 18 x 16 aluminum or fiberglass
mesh, removeable splines and all clips, catches,
and screws necessary to provide a complete installation.
|
| |
| FINISHES |
| All
aluminum finishes shall be as selected by the
architect. Finshes available: |
Standard or Special Color Paint (ESP)
Color Anodized
Clear Anodized
Powder Coat
Kynar 500
Siliconized Polyester
|
| |
| WARRANTY |
| Windows
furnished are certified and fully warranted against
any defects in material or workmanship under the
normal use and service for a period of one (1)
year from the date of fabrication. |
|
SERIES
400 CASEMENT
|
| |
|
P-HC-60 |
| SYSTEM: |
| Depth |
2" |
| Construction |
Tubular
Vents with Mitered and Crimped Corners
Solid Frame with Coped and Butt type assembly
Full 3/4" Glazing Leg |
| Material |
6063-T5
22,000 psi Tensile |
| Glazing |
Inside
Glazed
Wet Glazed with setting blocks and extruded glazing
bead
3/16" through 1" in-fill option |
| Hardware |
Stainless
Steel ™ 4-Bar hinges
Cast White Bronze Cam Handles and Keepers |
| Screens |
Extruded
or Roll formed Screens
Fiber Mesh, Aluminum Mesh or Stainless Steel Mesh |
| Finishes |
Standard
or Special Color ESP
Color Anodized (A44)
Clear Anodized (204-R1 or 215-R1)
Powder Coat
Kynar 500
Siliconized Polyester |
| |
|
HI-LITE
SPECIFICATIONS FOR SERIES 400 CASEMENT
|
| |
| PERFORMANCE: |
| Exceeds
AAMA Rating HC-65 for air infiltration, water
pressure and structural design. |
| |
| OPTIONS: |
Mullions:
Tubular, Self Mull
Receptor: 1 and 2-Piece, Sill Receptor
Custom options available, contact factory for
details. |
|
|
| GENERAL |
| Aluminum
Casement windows of Series 400 shall conform to
the design and construction of Series 400, as
manufactured by Superior Window Corporation. Windows
shall conform with all requirements of AAMA P-HC-60
specifications. |
| |
| CONSTRUCTION |
| Frame
and ventilator members shall be of 6063-T5 aluminum
alloy. Frame members, muntins, glazing beads,
mullions and starter members shall be solid extruded
shapes. Ventilator and intermediate frame members
shall be tubular extruded shapes. |
| |
| ASSEMBLY |
| All
frame members shall have coped joints and shall
be fastened together with aluminum/stainless steel
fasteners. All ventilators shall have mitered
joints, reinforced by a solid corner key and mechanically
crimped to prevent corner rotation. All joints
shall be weatherproofed with an acrylic seam sealer.
|
| |
| WEATHERSTRIPPING |
| All
ventilators shall be provided with two (2) rows
of extruded leaf type weatherstripping, set into
integrally extruded grooves or ventilator members.
Weatherstripping shall provide continuous perimeter
contact to assure weather tightness. |
| |
| GLAZING |
| Windows
shall be designed to receive from 3/16" to
1" insulated glass. Glazing leg rebates shall
not be less than .75 inches deep. Units shall
be glazed from the interior with an aluminum snap-in
bead. |
| |
| OPERATING
HARDWARE |
| All
ventilators shall be provided with manufacturer's
standard cam locking hardware to properly open,
close and lock vent. Locking hardware shall be
White Bronze with a satin finish or high-pressure
die cast zinc alloy with finish to match windows.
Ventilators exceeding 51" in width shall
be provided with two (2) locks and three (3) butt
hinges. Each vent shall be mounted on extruded
butt hinges four (4) inches long. |
| |
| SCREENS |
|
Screens
shall be sliding wicket for cam lock operators.
Screens shall be extruded or roll formed box
screens for roto operators and for inswing casements.
Screens shall be furnished to match window finish.
All
screens shall consist of 18 x 16 aluminum or
fiberglass mesh, removeable slines and all clips,
catches, and screws necessary to provide a complete
installation.
|
| |
| FINISHES |
| All
aluminum finishes shall be as selected by the
architect. Finshes available: |
Standard or Special Color Paint (ESP)
Color Anodized
Clear Anodized
Powder Coat
Kynar 500
Siliconized Polyester
|
| |
| WARRANTY |
| Windows
furnished are certified and fully warranted against
any defects in material or workmanship under the
normal use and service for a period of one (1)
year from the date of fabrication. |
|
|
|
|
|
|
|
|
| |
|
